Supported Motors/Encoders
Hardware Compatibility
Motors
Specification |
Value |
Notes |
|---|---|---|
Supported Motor Types |
PMAC (BLDC), ACIM |
ACIM support is currently experimental |
Temperature Measurement |
Thermistor Input |
10kΩ R25 |
Max Electrical Frequency |
800Hz |
Expected to improve with future firmware |
Encoders
Sensorless operation is available (experimental) for applications with a minimum speed > 100RPM, see here for more information. For all other applications, encoder feedback for the motors position is required.
- Key
✓: Supported
E: Experimental
S: Coming Soon
X: Not Supported
Encoder | Interface |
Pro |
S1 |
Micro |
|
|---|---|---|---|---|
Onboard Magnetic | internal |
✓ |
✓ |
✓ |
|
Incremental |
A,B,(Z) |
✓ |
✓ |
✓ |
Sin,Cos |
3.3V analog |
X |
X |
X |
Hall Effect Sensor |
A,B,C |
✓ |
✓ |
✓ |
CUI-AMT212B-V-OD |
RS485 |
✓ |
✓ |
X |
ODrive OA1 Encoder |
RS485 |
✓ |
✓ |
X |
CUI AMT23 |
SPI |
✓ |
✓ |
✓ [1] |
AMS (AS5047p, AS5048A) |
SPI |
✓ |
✓ |
✓ [1] |
MA732, MA702 |
SPI |
✓ |
✓ |
✓ [1] |
Broadcom-AEAT-9922 |
SPI |
E |
E |
X |
TLE5012B |
SPI |
E |
E |
X |
RLS (Orbis 14-bit only) |
SPI |
E |
E |
E [1] |
Renishaw RESOLUTE (18-bit only) |
BiSS-C |
E |
X |
X |
EnData/Tamagawa/RLS-AksIM |
~ |
X |
X |
X |
[1]: The ODrive Micro does not have a dedicated SPI MOSI pin. The encoder SPI MOSI must be connected to either VCC or GND depending on the model:
AMS, CUI, RLS Orbis encoders: Connect MOSI to VCC.
MA702/MA732 Encoders: Connect MOSI to GND.